Force |
The ForceFeedbackConditionEffect type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Axes | (Inherited from ForceFeedbackEffect) |
| DeadBand | Region around Offset in which the condition is not active, in the range from 0 through 1. In other words, the condition is not active between Offset minus DeadBand and Offset plus DeadBand. |
| Destroyed | (Inherited from ForceFeedbackEffect) |
| Direction |
Normalized vector conformable to the axes. For single-axis must be null.
(Inherited from ForceFeedbackEffect) |
| Duration |
The total duration of the effect, in seconds.
(Inherited from ForceFeedbackEffect) |
| EffectType | (Inherited from ForceFeedbackEffect) |
| NegativeCoefficient | Coefficient constant on the negative side of the offset, in the range from -1 through 1. If the device does not support separate positive and negative coefficients, the value of NegativeCoefficient is ignored, and the value of PositiveCoefficient is used as both the positive and negative coefficients. |
| NegativeSaturation | Maximum force output on the negative side of the offset, in the range from 0 through 1. If the device does not support force saturation, the value of this member is ignored. |
| Offset | Offset for the condition, in the range from -1 through 1. |
| Owner | (Inherited from ForceFeedbackEffect) |
| PositiveCoefficient | Coefficient constant on the positive side of the offset, in the range from -1 through 1. |
| PositiveSaturation | Maximum force output on the positive side of the offset, in the range from 0 through 1. If the device does not support force saturation, the value of this member is ignored. |
| StartTime | (Inherited from ForceFeedbackEffect) |
| UserData | (Inherited from ForceFeedbackEffect) |
See Also